Aluminum Case Pressure Recorders with Valving and Test Connections, 8 inch and 12 inch

SPEC SHEET

MANUAL

ORDER GUIDE

SKU: 48_42_Recorder Categories: , ,

Description

Palmer Circular Chart Recorders with Valving and Test Connections are durable, fully mechanical units with a low maintenance design.  The heavy aluminum, die cast and powder coated cases are all-welded construction to prevent deterioration, and available in 8 inch and 12 inch chart sizes. Each recorder is handcrafted to order in our Asheville, NC, USA factory.

Available with single or dual inlet pressure ports, all pressure elements are made of 316SS and are field replaceable.  Inlet connections have shut off valves to isolate each pressure element from the source pressure.  Internal pressure connection test ports are threaded for a gauge or a Pete's Plug® to allow for quick pressure readings.  For dual input systems, each input can be shut off and each pressure can be checked independently. Choose from our three available case mounting styles: wall, portable, or pedestal.

Our circular chart recorders are built with weatherproof construction, including a heavy lockable door with weatherstripping, with or without a window.  Designed for outdoor use, the rugged design withstands high levels of vibration and includes one-half inch screened air vent holes in the case, adjustable door pull latch with available locking hasp, all stainless steel corrosion resistant internals, and micro-adjustable wire linkage.

Low pressure elements for ranges 30 PSI and below are 316SS bellows diaphragm, tubing, and fittings.  Standard pressure elements for ranges over 30 to 10,000 PSI are made from 316SS helical coil with stainless steel fittings and tubing, and have 1/4 inch NPT fitting.  High pressure elements for ranges above 10,000 PSI are made from 316SS bourdon tube with autoclave fitting.  High pressure elements are calibrated on the rise only.

Choose from a variety of recorder drives to configure your recorder.  Our most popular option is the PC-11 C-Cell battery powered, eleven speed motor with speeds of 60 minutes, 96 minutes, 12 hours, 24 hours, 48 hours, 7 days, 8 days, 14 days, 16 days, 31 days or 32 days.  Our PC-12 C-Cell battery powered, twelve speed motor offers speeds of 30 minutes, 60 minutes, 2 hours, 4 hours, 6 hours, 8 hours, 12 hours, 24 hours, 3 days, 4 days, and 7 days.  Spring wound drives are available with standard rotation of 24 hours / 7 days are available.

Palmer Chart recorders with Valving and Test Connections use disposable fine point felt tipped pens in red, green, and blue.  Black pens are available.  We offer standard and specialty charts to meet the needs of your application.

View our Chart Recorder Order Guide to see details of all the available options.

Pete's Plug is a registered trademark of Peterson Products Company.

Specifications

Arc Line

6-3/8 inch
Case Material

Heavy die-cast aluminum
Case Finish

White Gloss Powder Coat Standard
Other finishes available upon request
Number of Pressure Inlets

1 or 2
Inches of Mercury Pressure Ranges

0 to 10 Hg
0 to 39 Hg
0 to 50 Hg
Inches of Water Pressure Ranges

0 to 10 in H2O
0 to 15 in H2O
0 to 20 in H2O
0 to 25 in H2O
0 to 30 in H2O
0 to 40 in H2O
0 to 50 in H2O
0 to 60 in H2O
0 to 100 in H2O
Ounces per Square Inch Pressure Ranges

0 to 10 oz/sq. in.
0 to 15 oz/sq. in.
0 to 20 oz/sq. in.
0 to 25 oz/sq. in.
0 to 30 oz/sq. in.
0 to 50 oz/sq. in.
Kilopascal Pressure Ranges

0 to 5 kPa
0 to 20 kPa
0 to 80 kPa
0 to 100 kPa
0 to 500 kPa
0 to 800 kPa
0 to 1,000 kPa
0 to 2,000 kPa
0 to 5,000 kPa
Bar Pressure Ranges

0 to 6 Bar
0 to 10 Bar
0 to 16 Bar
0 to 25 Bar
0 to 40 Bar
0 to 50 Bar
0 to 60 Bar
0 to 100 Bar
0 to 160 Bar
0 to 200 Bar
0 to 250 Bar
0 to 300 Bar
0 to 400 Bar
0 to 500 Bar
0 to 600 Bar
0 to 1,000 Bar
0 to 1,200 Bar
0 to 1,600 Bar
0 to 2,000 Bar
PSI Pressure Ranges

0 to 1 PSI
0 to 3 PSI
0 to 5 PSI
0 to 6 PSI
0 to 8 PSI
0 to 10 PSI
0 to 15 PSI
0 to 20 PSI
0 to 25 PSI
0 to 30 PSI
0 to 35 PSI
0 to 45 PSI
0 to 50 PSI
0 to 60 PSI
0 to 75 PSI
0 to 100 PSI
0 to 120 PSI
0 to 150 PSI
0 to 200 PSI
0 to 250 PSI
0 to 300 PSI
0 to 350 PSI
0 to 400 PSI
0 to 500 PSI
0 to 600 PSI
0 to 750 PSI
0 to 800 PSI
0 to 1,000 PSI
0 to 1,500 PSI
0 to 2,000 PSI
0 to 2,500 PSI
0 to 3,000 PSI
0 to 4,000 PSI
0 to 5,000 PSI
0 to 6,000 PSI
0 to 8,000 PSI
0 to 10,000 PSI
0 to 15,000 PSI
0 to 20,000 PSI
0 to 30,000 PSI
3 to 15 PSI
Battery Powered Recorder Drives

PC-11, eleven speed motor with speeds at: 60 minutes, 96 minutes, 12 hours, 24 hours, 48 hours, 7 days, 8 days, 14 days, 16 days, 31 days, or 32 days with OFF option.

PC-12, twelve speed motor with speeds at: 30 minutes, 60 minutes, 2 hours, 4 hours, 6 hours, 8 hours, 12 hours, 24 hours, 3 days, 4 days, and 7 days, with NO OFF option.
Spring Wound Recorder Drives

Dual Speed: Standard Rotation: 24 hours / 7 days.
Mounting Options

Wall Mounted
Portable
Pedestal Mounted
Door Style

Door with Glass Window
Door with Plexiglass Window
Solid Door
Door with Safety Glass Window
Process Connection

Standard: 1/4 inch NPT for pressure ranges at or below 10,000 PSI.
Optional: 1/2 inch NPT.
Autoclave fitting: Specify for 0 to 15,000 PSI, 0 to 20,000 PSI, and 0 to 30,000 PSI ranges. Optional for 0 to 10,000 PSI.
Internal Pressure Connection Test Ports

Threaded for a gauge
Pete's Plug®
Pen Colors

Standard: Red, Blue, Green.
Optional: Black
Accuracy

± 1/2 chart division for pressure measurements
8 inch Case Dimensions

W: 10.56 in x H: 13.625 in x D: 4.875 in (W: 268.3 mm x H: 346.0 mm x D: 123.8 mm). Case only, does not include feet or mounting.
8 inch Case Weight

From 10.2 lbs to 12.5 lbs, depending on configuration
12 inch Case Dimensions

W: 13.0625 in x H: 15.8125 in x D: 4.875 in (W: 331.8 mm x H: 401.6 mm x D: 123.8 mm). Case only, does not include feet or mounting.
12 inch Case Weight

From 15.5 lbs to 16.5 lbs, depending on configuration

Related products